“TEMPO” make lab precision oven (hot air oven) are with the forced air circulation provided by means of motorized blower fitted on the oven for recirculation of air ensures a homogeneous hot air mixture and an exact temperature profile. These hot air ovens are made of triple-walled construction. The unit is insulated with 3″ high-grade glass wool. Single door fitted on heavy hinges. The unit is provided with user-friendly stainless steel rod mesh trays.
- Temperature range – 5°C above ambient to 250°C
- Temperature accuracy – ±0.2°C
- Temperature uniformity – ±1°C
- Supply – 230V, AC
Standard Models
Inner chamber made of stainless steel (SS304) mirror finish and outer GI duly powder coated.
GMP Models
Inner chamber made of stainless steel (SS304) mirror finish and outer GI duly powder coated.
Construction
“TEMPO” laboratory precision oven (hot air oven) is made up of triple-walled construction with 3″ thick glass wool insulation. It is provided with a single door fitted on heavy hinges. The unit has specially designed SS trays that are user friendly and provides uniform distribution temperature.
Technical Specification
Controlling System
Imported microprocessor based autotune PID controller with CE mark and dual display of set value and process value.
Heater
SS tubular heating elements used on sidewalls to maintain uniform condition inside the chamber.
Air Circulation
A motorized blower on the top side of the chamber develops a unique airflow system that ensures maximum uniform temperature distribution inside the chamber. The unique airflow ensures that there is a quick recovery after the doors are opened.
Features
Single door fitted on the heavy cast and chromium-plated hinges with spring and roller type latch with an asbestos gasket to avoid heat loss. Specially designed stainless steel rod trays ensure uniform temperature distribution.
Safety Features
Safety standby thermostat to cut off the heater supply in case of overshoot of temperature.
Models & Optional Features
| Models | Capacity (litres) | Inner Dimensions H × W × L (cm) | Trays |
| TI – 128 A | 43 | 35 × 35 × 35 | 2 |
| TI – 128 B | 91 | 45 × 45 × 45 | 2 |
| TI – 128 C | 122 | 60 × 45 × 45 | 3 |
| TI – 128 D | 216 | 60 × 60 × 60 | 3 |
| TI – 128 E | 325 | 90 × 60 × 60 | 4 |
Optional Features
- Data logger
- Data scanner complete with sensor
- CFR 21 part 11 compliance software for data logger/scanner
- Safety digital temperature controller
- Timer